Woven labels are made to last the lifetime of your
product. The threads are pre-dyed and no inking is involved in the
production of woven labels. They are woven by various looms that
produce High Definition, Damask, Satin, and
Taffeta.
High Definition High end process using high thread counts to achieve the
ultimate clarity and a smooth finish.
Damask A lustrous based thread has a smooth soft texture. Typically
considered high end and used for intricate details, such as
signatures or small text. Available as Cut/End Fold, Centerfolded
or Straight Cut. Adhesive or Iron Backing
available.
Satin A polyester based lustrous thread which is soft and smooth.
Good quality results. Can be produce using a single needle or
broadloom set-up based on quality needs.
Taffeta A polyester based plain woven thread used for low cost or
basic uses. Not suggested for use in contact with skin as it tends
to be scratchy. More suitable for outerwear or accessories. Very
durable. Weaving can be double for definition
details.
There are many cut and fold options. Centerfold Woven or Printed label folded from the center, horizontally
or vertically. Stitching performed on loose ends opposite of folded
portion. * 0.8”(2cm) Minimum for woven labels.
Cut/End Fold Woven labels folded on the left and right side of label.
Usual seam allowance starts from 1/8”(0.3cm). Stitching is
performed on the inside of the inward fold.
Straight Cut A label that is cut and finished on all sides. End user
usually sews in from all four sides. Mainly used for patches or
outer labels for accessories.
